Here are the links to the files you will need.
Important: URCade comes with no warranty.
As previously mentioned, this is just a ready-to-use OS.
No ROMs are shipped, except the open-source BIOS that are installed by some emulators.
The system is under constant development, so it is not advised to install it on a "production" machine/device.
Always make a backup of your data prior to installing URCade.
Have a lot of fun using it! =)
-
URCade for PI:
For the ones in a hurry
Flash the system to an SDCard or USB stick device.
Once you have flashed the system, just boot it up and do your initial setup (wifi, password, etc.).
Then just add your own collections and BIOS files to the respective directories.
If you have connected your PI to your network, you should see your URCade device showing up (SAMBA).
Just drag and drop your files to their proper locations.
For the ones NOT in a hurry Install instructions and README file ( Mon 21 Nov 2022 12:51:40 PM EST )
URCade Images:
Minimum requirements: 8GB Media
( Thu Dec 14 02:55:15 PM EST 2023 )
- URCade 2.0 img file for Pi2 and Pi3 MD5 file
- URCade 2.0 img file for Pi4 MD5 file
- URCade 2.0 img file for Pi0 MD5 file
Kernel 5.10 builds for URCade 2.x
( Thu Dec 14 02:55:04 PM EST 2023 )- URCade 2.0 : Pi2 and Pi3 : 2G
- URCade 2.0 : Pi2 and Pi3 : 3G
- URCade 2.0 : Pi4 : 3G
- URCade 2.0 : Pi0 : 3G
- URCade 2.0 : Pi0 : 2G
Kernel 6.1 builds for URCade 2.x
( Thu Dec 14 02:54:42 PM EST 2023 ) -
URCade for PC [x86_64]:
( Thu Nov 20 10:08:36 AM EST 2025 )
- URCade-3.0_NO-ROMs_PC_amd64.iso MD5 file
- URCade-2.0_NO-ROMs_PC_amd64.iso MD5 file
- Flash the ISO to an USB stick (or burn it to a CD-ROM)
- Boot the computer with the media inserted
- Just follow the instructions on the screen
- NOTE for UEFI users: if you have issues booting, try disabling secure boot.
-
Old releases
>>> Direct link to all the available downloads <<<